Presented
by Russian House… 53 inventios
# 1
The
Invention
Title
Facility for thermomechanical drilling of hard rocks
The problem the inventor(s) wanted to
solve
Hard rocks drilling of large diameter wells with
drilling-out granite banks used in stone-quarrying and paper-making industries.
Description & Presentation
Facility is a resource-saving and ecologically safe
method for thermomechanical stimulation of a well bottom zone. The principle of
the action is based on a heating of hard rocks with following removal of
weakened rock layers from a well bottom by high-temperature cutters without its
melting.
Fields of application Mining industry
Advantages Due to high speed
of thermomechanical drilling material costs are significantly reduced, the use
of expensive diamond crown bits is excluded.
Stage of development design
Documentation available: ( ) No (+) Yes
brochure
The inventor (or inventors)
Name
1 Vladimir LITVINENKO
Photo
Self introduction Rector of the
Institute, head of the chair for well drilling technology and technical
equipment, Doctor of Sciences, professor, Academician, full member of the
International Academy of Sciences of higher school, International engineer - teacher
Name 2 Georgiy
soloviev
Self introduction Senior
researcher of the chair for well drilling technology and technical equipment,
PhD, numerous prize-winner of international exhibitions and saloons for
inventions and innovations.
Owner of the invention? (+) No ( ) Yes St. Petersburg
State Mining Institute
Protection
Patent Status: Russian patent pending № 2008110308/03
Priority 17.03.2008
Countries where it is in force
Business
intention
Cooperation
Looking for investor(s)
Contact
Name St.
Petersburg State Mining Institute
Address:
2, line 21, Vasilyevskiy ostrov ,
Fax
+7 812 327 7359 Tel
+ 7 812 328 8600
E-mail:
yakovlev333@yandex.ru
# 2
The
Invention
Title
Wind-power installation
The
problem the inventor(s) wanted to solve
The invention is
intended for electric power generation using a wind
energy under normal weather conditions and hurricanes
Description & Presentation
The installation has a wind trap consisting of a top
motionless guide, bottom mobile guide and mobile rotary screens for the fuller
use of wind energy. Wind turbines with coaxial shafts at ground level are
installed in foundation pits. Blades catching wind streams are located radially
on wind turbine drums. The installation has an electric current generator.
Fields of application
Electric power industry
Advantages
The plant can be used under
severe weather conditions during heavy wind storms and hurricanes. Invention
realization leads to the efficiency coefficient increase by 1.2-2 times. Due to
developed construction the plant strength has grown significantly
Stage of development design, prototype
Documentation available: ( ) No (+) Yes
brochure
The inventor (or inventors)
Name 1 Ilya
BELOGLAZOV
Self introduction Head of
the chair for automation of technological processes and manufactures, professor,
numerous prize-winner of international exhibitions and saloons for inventions
and innovations.
Name 2 Boris
KUTSENKO
Self introduction Docent of the
chair for automation of technological processes and manufactures, numerous prize-winner of international exhibitions and saloons for
inventions and innovations.
Name 3 Maksim
GLUSHCHENKO
Self introduction Post-graduate
student of the chair for automation of technological processes and
manufactures/
Owner of the invention? (+) No ( ) Yes St. Petersburg
State Mining Institute
Protection
Patent Status: Patent № 2315891
Priority 04.02.2008
Countries where it is in force Russian
Federation
Business
intention
Cooperation
Looking for investor(s)
Contact
Name St.
Petersburg State Mining Institute
Address:
2, line 21, Vasilyevskiy ostrov ,
Fax
+7 812 327 7359 Tel + 7 812 328 8600
E-mail:
yakovlev333@yandex.ru
# 3
The
Invention
Title
Underground depository for
radioactive waste products
The problem the inventor(s) wanted to
solve
The underground depository for radioactive waste
products is intended for deposition of low- and middle-activity radioactive
waste products
Description & Presentation
The layout drawing is a spiral made as an ellipse.
Constriction of tunnels is carried out with by one mechanized shaft-sinking set
in diameter of
Fields of application
Deposition of radioactive waste products
Advantages
Advantage of the technology is increase of ecological
safety and reduction of construction cost.
Stage of development design, prototype
Documentation available: ( ) No (+) Yes
leaflet, brochure
The inventor (or inventors)
Name 1 Anatoly
PROTOSENYA
Photo
Self introduction. Head of the chair for construction
of mountain enterprises and underground structures, DSc,
professor, honored worker of science of the
Name 2 Maksim KARASEV
Photo
Self introduction Chair assistant
for construction of mountain enterprises and underground structures, numerous prize-winner of international exhibitions and saloons for
inventions and innovations. The author of 9
printed works.
Name 3 Dmitriy PETROV
Photo
Self introduction Chair assistant
for construction of mountain enterprises and underground structures, numerous prize-winner of international exhibitions and saloons for
inventions and innovations. The author of 11 printed works and 2 patents.
Owner of the invention? (+) No ( ) Yes St.
Petersburg State Mining Institute
Protection
Patent Status: Patent № 2265904
Priority 28.06.2004
Countries where it is in force
Business
intention
Cooperation
Looking for investor(s)
Contact
Name St.
Petersburg State Mining Institute
Address:
2, line 21, Vasilyevskiy ostrov ,
Fax
+7 812 327 7359 Tel + 7 812 328 8600
E-mail:
yakovlev333@yandex.ru
# 4
The
Invention
Title
Fabrication of aluminium
ligatures with nanostructured intermetallics
The problem the inventor(s) wanted to
solve
An original method to obtain refractory compounds by
metallothermic recovery of precursors has been developed
Description & Presentation
To obtain alloyed aluminium-magnesium alloys a
technology of Al-Mg-Sc ligature synthesis with nanostructured intermetallics
has been developed.
Fields of application
The material is used in complex power structures: in
units of aviation and space purposes, high-speed ships as hull materials,
nuclear reactor units, car parts, etc.
Advantages
Addition of scandium microquantities increases the
tensile and yield strength of aluminium alloys and provides high stability at
heating. The invention allows to simplify and reduce
the cost of technology to obtain high-strength aluminium alloys (decrease
temperature and melting time).
Stage of development pre-production
Documentation available: ( ) No (+) Yes
brochure, sample
The inventor (or inventors)
Name 1 Victor SIZYAKOV
Photo
Self introduction Head of the chair
of nonferrous metals metallurgy, professor, 285 scientific works, including 108
patents, scientific adviser of the
Name 2 Sergey
ALEXANDROVSKIY
Photo
Self introduction Chair
professor of nonferrous metals metallurgy. The author of more than 286 printed
works, including 76 patents.
Owner of the invention? (+) No ( ) Yes St.
Petersburg State Mining Institute
Protection
Patent Status: Patents №№ 2230810, 2261924, 2287601
Priority 20.06.2006, 10.10.2005, 20.11.2006
Countries where it is in force
Business
intention
Licensing
Cooperation
Contact
Name St.
Petersburg State Mining Institute
Address:
2, line 21, Vasilyevskiy ostrov ,
Fax
+7 812 327 7359 Tel + 7 812 328 8600
E-mail:
yakovlev333@yandex.ru
# 5
The
Invention
Title
Bioleaching of sulphide
gold-containing ores
The problem the inventor(s) wanted to
solve
Technical result of this invention is reduction of
time for treatment of sulphidic gold-containing ores due to increase of
sulfides oxidation rate at bacterial leaching.
Description & Presentation
The method for treatment of sulphide gold-containing
concentrates consists in the use of technology of biological leaching at
heating of gas-air mix up to temperature of 40˚С. It allows to
maintain temperature of a bacterial solution in the range of 18÷25˚С (optimum
conditions for bacteria vital functions).
Fields of application
Gold mining and processing industry
Advantages
The process is ecologically clean. The
increase of the gold extraction rate up to 90% in comparison with 30-40% at
direct cyanidation of sulphide ores. Expenses on maintenance of reactors
are decreased due to increase in sulfides oxidation rate (2 times).
Stage of development production item
Documentation available: ( ) No (+) Yes
brochure, website (www.polyusgold.com)
The inventor (or inventors)
Name 1 Vladimir LITVINENKO
Photo
Self introduction Rector of the
Institute, head of the chair for well drilling technology and technical
equipment, Doctor of Sciences, professor, Academician, full member of the
International Academy of Sciences of higher school, International engineer -
teacher
Name
2 Nail TELYAKOV
Photo
Self introduction DSc,
professor, Head of chair of furnace technologies and energy carriers
processing, dean of the metallurgical faculty. Numerous prize-winner
of international exhibitions and saloons for inventions and innovations.
Owner of the invention? (+) No ( ) Yes St. Petersburg
State Mining Institute
Protection
Patent Status: Patent № 2283358
Priority 18.04.2005
Countries where it is in force
Business
intention
Licensing
Cooperation
Contact
Name St.
Petersburg State Mining Institute
Address:
2, line 21, Vasilyevskiy ostrov ,
Fax
+7 812 327 7359 Tel + 7 812 328 8600
E-mail:
yakovlev333@yandex.ru
# 6
The Invention
Title
Zenith SPPS: a system for operative-calendar planning
and dispatching control
The problem the inventor(s) wanted to solve
A lot of enterprises have no good planning and
dispatching system for its workshops, moreover they don’t clearly know if they
can accept new order or tell a customer when his order will be finished –
Zenith SPPS can help to plan your business!
Description
Zenith SPPS can be considered as a core of systems for
control of modern industrial shops, integrating in a single unit automated
technological preparation of the manufacture (routing technologies),
operative-calendar planning (estimation, correction and computer support of the
industrial graphs), dispatching control of the components movement and
availability.
Presentation.
The following automated workplaces (AWP) are used in
the system: AWP of the shop dispatcher; AWP of the production division foreman
(the number of workplaces is unlimited).
Fields of application
Operative calendar planning at enterprises from
mechanical engineering and instrument-making to logistics and education
(practically for any business activities).
Advantages
Easy installation and support; high-grade core
algorithm; advanced network capabilities; data export/import form other
software systems; good investment at a low cost.
Stage of development.
production item
Documentation
available: ( ) No ( +)
Yes
leaflet, website,
demo.
The inventor (or inventors)
Name 1 Sergei VYSOCHIN
Name 2 Yuri SMIRNOV
Owner of the invention? (Is it the
inventor?) ( ) No ( +) Yes
Protection
Certificate of software
registration № 2005610062 from 24.10.2004,
Business intention
Selling the new product
Contact
Name Yuri SMIRNOV (Soff Trade Ltd)
Address: bl. 2,
Fax
Tel +7 499 501 4682
E-mail: soff.trade@mail.ru
# 7
The
Invention
Title
Steelmaking in BOF
The problem the inventor(s) wanted to
solve
The technical problem to be
solved by this invention consists in optimization of steelmaking in oxygen
converters (Basic Oxygen Furnaces – BOF), improved process stability, longer
service life of refractory lining.
Description&Presentation
BOF steelmaking comprises charging of metal scrap and hot iron, addition
of slag-forming materials, blowing with oxygen lance. The lance height
at the blowing start and end is determined by empirical dependence, and during
the blowing, when carbon oxidation occurs, the height is adjusted depending on
the off-gas temperature
Fields of application
This invention is applied to
steelmaking in BOF
Advantages
The lance height in relation to flat bath level is
changed with due account for ongoing slag forming processes. Thus it prevents
steel spitting and decreases deposits on oxygen lance and gas-cooling hood.
Stage of development pre-production
Documentation available: ( ) No ( +) Yes brochure
The inventor (or inventors)
Name
1 Viktor RASHNIKOV
Name
2 Viktor DJACHENKO
Name
3 Yury BODYAEV
Name
4 Alexander METELEV
Owner of the invention? (+) No ( ) Yes JSC «
Protection
Patent Status: Patent № 2261919
Priority 19.07.2004
Countries where it is in force
Business
intention
Selling licenses
Contact
Name Natalia V. Kryukova
Address:
93, Kirova str.,
Fax +
7 3519 24-62-25 Tel + 7 3519 241403
E-mail:
krukova@mmk.ru
# 8
The
Invention
Title
Hot rolling
of low-alloy steel at a continuous wide-strip mill with two groups of coilers
The problem the inventor(s) wanted to
solve
The technical problem to be solved by this invention
consists in provision of conditions to ensure identical mechanical properties
of the final strips of various thicknesses produced at a wide-strip mill with
two groups of coilers.
Description&Presentation
Regulation
of finishing and coiling temperatures as well as strip cooling conditions at
intermediate and delivery tables enables formation of optimum
microstructure. Speed-temperature
conditions of rolling and coiling are specified as factor of the final strip
thickness in accordance with its strength properties
Fields of application
This method is used for
obtaining similar mechanical properties of the final strips with different
thicknesses intended for further pressing
Advantages
The final fine-grain
microstructure ensures the achievement of the ductility index which governs
suitability of rolled material for further processing, including cold rolling
with downstream pressing, with respect to both thin strip and plates with
identical mechanical properties.
Stage of development industrial design
Documentation available: ( ) No (+) Yes brochure
The inventor (or inventors)
Name 1 Sergey DENISOV
Name 2
Pavel SMIRNOV
Name 3
Eduard GOLUBCHICK
Name 4
Igor KAZAKOV
Owner of the invention? (+ ) No ( ) Yes JSC «
Protection
Patent
Status: Patent № 2312720
Priority 26.10.2005
Countries where it is in force
Russian Federation
Business
intention
Selling licenses
Selling the product
Contact
Name Natalia V. Kryukova
Address:
93, Kirova str.,
Fax +
7 3519 24-62-25 Tel + 7 3519 24-14-03
E-mail:
krukova@mmk.ru
# 9
The
Invention
Title
Slitting
of Moving Steel Strip
The problem the inventor(s) wanted to
solve
The technical problem to be
solved by this invention consists in decreasing the costs for purchasing
expensive knives and improving the quality of slit material
Description&Presentation
The method involves application of normal and
counter forces to the strip surface at the point of division with simultaneous
stretching of slit narrow strips. During slitting, electrical current
is delivered to divided parts to heat the metal in division point; during
stretching of slit strips, their cross sections are turned to one side at a
certain angle.
Fields of application
The invention is applied to slitting of a wide strip into narrow
strips of required width
Advantages
This method contributes to
improvement of the slit material quality, prevents "sticking" of slit
strips' edges and provides freedom from any edge defects. It has become
possible to slit strong steels with the help of rolls made of low-cost carbon
steel.
Stage of development pre-production
Documentation available: ( ) No (+) Yes
brochure
The inventor (or inventors)
Name 1
Anatoly URMATSKIKH
Name 2
Gennady SENICHEV
Name 3 Vadim ANTIPANOV
Name 4 Denis MAKSIMOV
Owner of the invention? (+) No ( ) Yes JSC «
Protection
Patent Status: Patent No. 2281189
Priority 16.06.2004
Countries where it is in force Russian Federation
Business
intention
Licensing
Contact
Name Natalia V. Kryukova
Address:
93, Kirova str.,
Fax +
7 3519 24-62-25 Tel + 7 3519 24-14-03
E-mail:
krukova@mmk.ru
# 10
The
Invention
Title
Production of Hot-Rolled
Hot-Dip Galvanized Strip
The problem the inventor(s) wanted to
solve
The technical problem to be
solved by this invention consists in increased yield of hot-rolled hot-dip
galvanized strip through elimination of the defect known as 'coil break' which
occurs during processing of a hot-rolled strip into a hot-dip galvanized
product
Description&Presentation
Steel
is processed in a hot-rolling strip mill at a specified finishing temperature.
Before coiling, the strip is subjected to differentiated water cooling.
Speed-temperature conditions of rolling and coiling are specified as factor of
the final strip thickness in accordance with its strength properties.
Fields of application
This invention is applied to
production of hot-rolled strip for further processing by hot-dip galvanizing
Advantages
It ensures required
mechanical properties of a wide hot-rolled strip intended for pickling and zinc
coating (by hot dipping) omitting the cold rolling stage.
Stage of development industrial design
Documentation available: ( ) No (+) Yes
brochure
The inventor (or inventors)
Name 1
Pavel SMIRNOV
Name 2
Sergey DENISOV
Name 3
Eduard GOLUBCHICK
Name 4
Sergey LASKOV
Owner of the invention? (+) No ( ) Yes JSC «
Protection
Patent
Status: Patent № 2310528
Priority 26.10.2005
Countries where it is in force
Business
intention
Licensing
Selling the product
Contact
Name Natalia V. Kryukova
Address:
93, Kirova str.,
Fax +
7 3519 24-62-25 Tel + 7 3519 24-14-03
E-mail:
krukova@mmk.ru
# 11
The
Invention
Title
Production of Rolled Steel
The problem the inventor(s) wanted to
solve
The technical problem to be solved by this invention
consists in producing the rolled products for demanding applications, with
improved tensile strength, yield strength, elongation, toughness, cold
resistance and welding ability
Description&Presentation
Production of rolled steel comprises making of steel
with certain chemical composition, ladle treatment, continuous casting,
austenitizing, roughing and finishing rolling at 980-730°С with total
reduction of 65-80%, individual reductions of 10-12% and strain rate
Fields of application
This invention is applied to
production of rolled steel for manufacturing gas/oil pipelines to be used in
regions of the Extreme North (arctic application).
Advantages
This invention is the first
ever developed technology which ensures the production of rolled steel for
demanding applications with no extra costs incurred due to optimum selection of
chemical composition and hot rolling conditions. The resulting rolled products
have been positively evaluated by the Russian pipe makers
Stage of development industrial design
Documentation available: ( ) No (+) Yes
brochure
The inventor (or inventors)
Name 1 Viktor
RASHNIKOV
Name 2
Sergey DENISOV
Name 3
Yury BODYAEV
Name 4
Vladimir KORNILOV
Name 5
Oleg NICKOLAEV
Owner of the invention?
(+) No ( ) Yes JSC «
Protection
Patent Status: Patent № 2255987
Priority 19.07.2004
Countries where it is in force
Russian Federation
Business
intention
Selling licenses
Contact
Name Natalia V. Kryukova
Address:
93, Kirova str.,
Fax +
7 3519 24-62-25 Tel + 7 3519 24-14-03
E-mail:
krukova@mmk.ru
# 12
The
Invention
Title
Rolling of
Channels
The problem the inventor(s) wanted to
solve
The technical problem to be
solved by this invention consists in providing a stable height of channel
flanges to decrease the amount of defective and off-grade material
Description&Presentation
This rolling technique
involves consecutive reductions of a billet. After the control pass, the billet
is centered by both lower and upper roll; the web width in the following passes
remains constant, and the required size is obtained in the last pass by means
of straightening the web.
Fields of application
The invention is applied to
rolling of channels
Advantages
This is the first ever developed technique which makes it possible to
produce equal-flange channels (channels with equal height of flanges).
Stage of development industrial design
Documentation available: ( ) No (+) Yes
brochure
The inventor (or inventors)
Name 1
Vladimir LOGINOV
Name 2
Andrei MOROZOV
Name 3
Vladimir KUZNETSOV
Name 4
Viktor AVDONIN
Owner of the invention? (+) No ( ) Yes JSC «
Protection
Patent Status: Patent N 2272683
Priority 19.09.2004
Countries where it is in force Russian Federation
Business
intention
Selling
a license
Selling the product
Contact
Name Natalia V. Kryukova
Address:
93, Kirova str.,
Fax +
7 3519 24-62-25 Tel + 7 3519 24-14-03
E-mail:
krukova@mmk.ru
# 13
The
Invention
Title
Multi-pulse
rectifier
The problem the inventor(s) wanted to
solve
Еnergy
saving
Description&Presentation
Unique type of 12-, 16-, 20-,
24-pulse rectifiers is developed. Multi-pulse rectifier is better
electromagnetic-compatible with supply mains and another
abutting power consumers – devices of communication, signalization and
automatic lockout on rail transportation, etc.
Fields of application
for power supplying system
Advantages
Multi-pulse
rectifier for power supplying system ensures electric loss enhancement in technological processes and a growth
of efficiency factor of working equipment.
They allow to
receive power saving about 2,5% of total energy
consumption in comparison with classic rectifiers. Besides, new rectifiers can
be applied on
working equipment and don’t demand reconstruction of supply mains
Stage of development prototype,
pre-production
Documentation available: ( ) No (+) Yes
leaflet, website
The inventor (or
inventors)
Name 1 German VORFOLOMEEV
Name 2 Sergey EVDOKIMOV
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Patent granted № 47591
- Utility model
Patent pending 2007125446 - invention
Priority 28.02.2005 / 5.07.2007
Countries
where it is in force
Business
intention
Licensing
Cooperation
Selling the new product
Contact
Name Elena ZHITENKO
Address: 20, Karl Marx av.,
Fax : +7 383 346 0902 Tel +7 383 346 0291
E-mail: fee@first.nstu.ru
# 14
The Invention
Title
Silicate
covering of ash-and-slag waste (ASW) of power stations
The problem the inventor(s) wanted to
solve
Reduction in ecological load on the
environment in the area of ranges ASW, including harmful emissions in the air
environment (dust) and the water environment
Description&Presentation
Properties of
silicate covering:
Content ASW
(mass)
20…60 %
Regime of cold
curing:
Temperature 20…35 оС
Duration
200…500 h
Regime of hot
curing:
Temperature 130...
150 оC
Duration 0.5… h
Class of
chemical resistance to solutions
of surface-active substance (
Binder liquid
glass sodium
Fields of application
decorative art,
construction, design
Advantages
Wares’ production on the basis of ASW and their components is
profitable due to Use of cheap raw material and Decrease of the areas of the
expensive ground areas filled under ASW in area of megalopolis and reduce of costs on the maintenance of ash disposal area
Stage of development prototype, pre-production
Documentation available: ( ) No (+) Yes
leaflet, sample, website
The inventor (or inventors)
Name 1
Name 2
Boris
KHLEBNIKOV
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: patent pending N2007136329 - Invention
Priority 1.10.2007
Countries where it is in force Russian Federation
Business
intention
Licensing
Cooperation
Selling the new product
Contact
Name Elena ZHITENKO
Address: 20, Karl Marx av.,
Fax :+7 383 346 0902
Tel +7 383 346 0291
E-mail: fee@first.nstu.ru
# 15
The Invention
Title
Multi-pole
magnetoelectric machine (MMM)
The problem the inventor(s) wanted to
solve
Increasing reliability of engine operation
Description&Presentation
The МММ is a nonconductor
a.c. motor with permanent magnets
Performance attributes:
Diapason of
torque 0.1 …1000 newton
metre
Rotational
speed 0 … 10000 rpm
Rate of torque
to mass 3 …6 newton metre /kg
Fields of application
Power engineering
(for a wind-driven power plant different output) and automobile industry (as a
main part of steering wheel gear electromechanic booster, of starter-generator
gear and electric brake)
Advantages
High reliability
and long live time of mechanism; high precision of control systems; embedding
of complex operation algorithms including operation at the specified speed of
rotation with a high precision of frequency maintenance and its gradient; large
running torque at small motor dimensions; essential simplification of motor
construction and lowering of operating costs
Stage of development prototype,
pre-production
Documentation available: ( ) No (+ Yes
leaflet, website
The inventor (or inventors)
Name
Alexander
SHEVCHENKO
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Patent granted №
53828 - Utility model,
Priority 3.05.2005
Countries where it is in force Russian Federation
Business
intention
Licensing
Cooperation
Selling the new product
Contact
Name Elena ZHITENKO
Address: 20, Karl Marx av.,
Fax :+7 383 346 0902
Tel +7 383 346 0291
E-mail: fee@first.nstu.ru
# 16
The Invention
Title
Pile driving
electric hammer
The problem the inventor(s) wanted to
solve
Еnergy
saving, ecology
Description&Presentation
Electric hammer
is developed an the base of induction motor of
frequency steering.
Under Length
(with cap) - 3500mm and Total mass -
6.0ton it’s Average power consumption
(under battery operation) is less 15 kW,
Thump frequency is comparable with hydrohammer’s analog property
and Average driving speed for pile of 6-8m length - 2,5…3,0 m/min
Structural
features allow to produce electric hammers with
striker mass above 100 ton.
Fields of application
construction
Advantages
•
Small size and
mass
•
ecological
compatibility
•
simple structure
and exploitation technology
•
Low production
costs
Stage of development prototype, pre-production
Documentation available: ( ) No (+) Yes
leaflet, website
The inventor (or inventors)
Name
Alexey
MALAKHOV
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Patent granted RU 2282029 - Invention
patent
pending 2008115709 -
invention
Priority 23.09.2004/21.04.2008
Countries where it is in force
Business
intention
Licensing
Cooperation
Selling the new product
Contact
Name Elena ZHITENKO
Address: 20, Karl Marx av.,
Fax :+7 383 346 0902
Tel
+7 383 346 0291
E-mail: fee@first.nstu.ru
# 17
The Invention
Title
Device for integrated study of the vegetative nervous
system
The problem the inventor(s) wanted to
solve
Description
General idea of the invention is registration and
record as more as possible parameters of vegetative neural system.
Visualization and control it on-line.
Presentation
The device for complex diagnostic of
vegetative nervous system contains personal computer, sensor of electro-dermal
activity, connected with the analog multiplexer through signal amplifilters and
filters of signals, analodigital converter, micro-controller,
connected to PC.
Fields of application
General medicine, sport medicine, dentistry, psychology, physiology,
diagnostic medicine, neurology.
Advantages
The invention allows to
record simultaneously electro-dermal activity, bioelectric activity of
muscles, impedance plethysmography and frequency of respiratory movements. Also
device is informative, self-descriptiveness, mobility, portability,
transportability, usability.
Stage of development prototype, pre-production
Documentation available: ( ) No (+) Yes
sample
The inventor (or inventors)
Name 1
Evgeniy SOLOVYKH
Self introduction. Associate professor
Name 2 Dmitryi ISHUTIN
Name 3 Sergey ARUTYUNOV
Professor
Name 4
Alexandr MOLCHANOV
Professor
Name 5
Dmitryi MOSOLOV
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Patent granted RU № 2306841 - Industrial design
Priority 19.05.2005
Countries where it is in force
Business
intention
Cooperation
Contact
Name Evgeniy SOLOVYKH
Address:
20/1, Delegatskaya
st.,
Fax +7 499 973 3272
Tel +7 910 433 2147
E-mail:
solovykh@mail.ru
# 18
The Invention
Title
The method of
shell formation for intestines soluble capsules
The problem the inventor(s) wanted to
solve
Development of technology
of high protective capsules shell formation, processing dilution on exact part
of gastrointestinal tract
Description
The methodology for
encapsulation of lipophilic substances was developed, the samples of
encapsulated forms of nutrients were synthesized, the optimization of
encapsulation parameters was provided and methodology for mass transfer
coefficient determination was developed
Presentation Provide
illustrations, if you wish
Fields of application
The method of
shell formation for intestines soluble capsules can be used for the
construction of direct drug delivery system, physiology functional food
ingredients etc
Advantages
Alginate calcium
base shell is insoluble in acidic medium of the stomach, it provides high
protection of inconsonant from enzymes influence and it is soluble at exact
pH-rate and in definite parts of the gastrointestinal tract
Stage of development pre-production
Documentation available: ( ) No (+) Yes
leaflet
The inventor (or inventors)
Name 1
Oleg MANAENKOV
Name 2
Alexander SIDOROV
Name 3
Esfir SULMAN
Name 4
Boris TIKHONOV
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Patent
RU № 2287983 - Invention
Priority 28.04.2005
Countries where it is in force
Business
intention
Selling the patent
Cooperation
Looking for investor(s)
Contact
Address: 22, Afanasy Nikitin srt., Tver,
170026,
Fax +7 4822 449317 Tel
+7 4822 449317
E-mail:
sulman@online.tver.ru
# 19
The Invention
Title
Method for
preparing 2-keto-L-gulonic acid
The problem the inventor(s) wanted to
solve
Method involves
oxidation of L-sorbose in the presence of platinum-containing polymeric catalyst
applied on Al2O3 in medium with the equimolar content of
NaHCO3 under atmosphere pressure, at the rate stirring 870-1000
rev/min and bubbling pure oxygen as an oxidizing agent
Description
Reaction is carried out in
medium water: ethyl alcohol 7-10 vol. %, in the concentration of L-sorbose 0.29-0.6 mole/l, on spherical microparticles of catalyst in
the amount 20-40 g/l with ultra-thin layer of polydiallyldimethylammonium
chloride as cationic polyelectrolyte with platinum nanoparticles formed on it
Presentation Provide illustrations, if you wish
Fields of application
Invention relates to the
improved method for preparing 2-keto-L-gulonic acid. This compound is an
intermediate substance in synthesis of vitamin C
Advantages
The content of platinum in
catalyst is 1-2%. The feeding rate of oxidizing agent is 400-450 ml/min. The
end product is obtained with high yield 97-99%
Stage of development pre-production
Documentation available: ( ) No (+) Yes
leaflet
The inventor (or inventors)
Name 1
Esfir SULMAN
Name 2
Pyotr VALETSKY
Name 3
Lyudmila
BRONSTEIN
Name 4
Natalia LAKINA
Name 5
Valentina
MATVEEVA
Name 6
Mikhail SULMAN
Owner of the invention? (+) No ( ) Yes Tver
State Technical University, A.N. Nesmeyanov Institute of
Protection
Patent Status: Patent RU № 2245324 - Invention
Priority 08.09.2003
Countries where it is in force
Business
intention
Selling the patent
Cooperation
Looking for investor(s)
Contact
Address: 22, Afanasy Nikitin srt., Tver,
170026,
Fax +7 4822 449317 Tel +7 4822 449317
E-mail:
sulman@online.tver.ru
# 20
The Invention
Title
The method for liquid core capsules for liquid phase cultivation
The problem the inventor(s) wanted to
solve
The
base for the invention is formation of technological process, which realization
permits liquid core capsules synthesis, characterized by low internal diffusion
resistance
Description
The
method of capsules synthesis based on carrying in drops of sodium alginate
solution of 1,0÷1,5 wt % concentration with cultural
cells in calcium chloride solution of 2,0÷2,5 wt % concentration. The delay
time of formed capsules in calcium chloride solution is 4÷5 minutes
Presentation Provide illustrations, if you wish
Fields of application
The
method of capsules core synthesis is suitable for realization in laboratory and
semi industrial conditions using existing equipment for production of capsules
immobilized with microorganism cells for liquid phase cultivation
Advantages
The realization of method
permits liquid core capsules synthesis, characterized by low internal diffusion
resistance. The technical result is acceleration of metabolism processes
between immobilized cells and external phase
Stage of development prototype
Documentation available: ( ) No (+) Yes leaflet
The inventor (or inventors)
Name
1 Alexander
SIDOROV
Name 2 Esfir
SULMAN
Name 3 Oleg MANAENKOV
Name 4 Ekaterina PRUTENSKAYA
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Patent pending № 2007118853/13(020541) - Invention
Priority 21.05.2007
Countries where it is in force
Business
intention
Selling the patent
Cooperation
Looking for investor(s)
Contact
Address: 22, Afanasy Nikitin srt., Tver,
170026,
Fax +7 4822 449317 Tel +7 4822 449317
E-mail:
sulman@online.tver.ru
# 21
The Invention
Title
Device for
investigation of functional and emotional state of the person
The problem the inventor(s) wanted to
solve
Equipment and
method for investigation of the functional and emotional state of the person heave been developed, baized on the analysis eye motion from
three information sources of eye motion.
Description
To investigate a functional and emotional state of a
person, the special computer program has been developed for parameters writing
of eye motion. Simultaneous analysis of three information sources on the
registered parameters of a motion for 25 patients gives an opportunity to
differ false from the true, evaluate emotional strain and the functional states
of the person in 90 %.
Presentation
Fields of application
The invention can be applied for the purposes of
psychology, criminalistics, medicine, for the express-diagnostics of drivers
Advantages
The advantage of an eye’s motion analysis moreover,
impossibility of simulated adjustment eye motion system. The advantage of the equipment:
1) absence of contact sensors, installation new, before not investigated
parameters of ophthalmic motions at emotional pressure of the patient, 2) small
time of diagnostics, 3) portability of the arrangement.
Stage of development prototype
Documentation available: ( ) No (+) Yes
leaflet, brochure, sample, video, website
The inventor (or inventors)
Name 1 Dmitry USANOV
Self introduction. the pro-rector, manager Faculty of the
Name 2 Anatoly SKRIPAL
Self introduction. doctor, the professor, manager Faculty of medical physics of
the
Name 3 Andrey RYTIK
Self introduction. P.H.D., the senior lecturer of
faculty of medical physics of the
Name
4 Anatoly VAGARIN
Self introduction. the
scientific employee of faculty of a solid state physics of the
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Patent pending № 2007111403
- Invention
Priority 28.03.2007
Countries where it is in force
Priority
Countries where it is in force
Business
intention
Licensing
Selling the new product
Contact
Name Dmitry
USANOV
Address:
155, Moskovskaya
str.,
Fax +7 8452
511430 Tel +7 8452 511430
E-mail:
UsanovDA@info.sgu.ru
# 22
The Invention
Title
The technique of
visualization of a piece of music
The problem the inventor(s) wanted to
solve
The essentially
new way of visualization of a piece of music which realizes an opportunity of
unequivocal identification of the sound by the visual support provides an
opportunity of better perception of the music.
Description
The complex has
been developed intended for reproduction of color sequences: formation of color
figures with changeable brightness and saturation that allows receiving
unequivocal identification of the sound by the visual support in real time. The
basis of the technique of music’s visualization is a system of conformity of
notes to the colors, satisfying to a principle of individuality of each piece
of music
Presentation
The “Color-musical center” includes computer system, a multimedia projector and
sound-reproducing system. The image: the general view of a complex at
the minimal number of accessories, during the registration of changes of
physiological functions.
Fields of application
Using by poorly hearing people for perception of music
by means of color, the organization of entertaining actions, medicine,
education
Advantages
The results of
experimental researches of influence color-musical exposure on parameters of
cardiovascular activity of the person showed that the effect from color-musical
influence essentially exceeded total effect from influence by a sound and color
separately. That testifies on an opportunity of using the described technique
of music visualization with the purpose of quality improvement of music
perception.
Stage of development pre-production
Documentation available: ( ) No (+) Yes leaflet
The inventor (or inventors)
Name
1 Lidia USANOVA
Name
2 Anastasia USANOVA
Name 3 Anatoly
SKRIPAL
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Patent RU № 2295376 - Invention
The
certificate on registration of the program №2007610999
Priority 20.03.2007
Countries where it is in force Russian Federation
Business
intention
Licensing
Cooperation
Selling the new product
Contact
Name Lidia USANOV
Address:
83,
Astrakhanskaya str.,
Fax +7 8452 271496
Tel +7-9616419915, +7 8452 511430
E-mail: lida.usanova@mail.ru
# 23
The Invention
Title
Computer video technologies for eye nystagmus
diagnostics and treatments
The problem the inventor(s) wanted to
solve
Are intended for computer video diagnostics and treatment by external
influence of light of variable amplitude and frequency
Description&Presentation
The method includes continuous
light influence on the patient's eyes, selection of peak-frequency
parameters of external influence, identification of the character of synchronizing action of
variable light influence, computer diagnostics of results of eye sight
correction at nystagmus.
Fields of application
Medicine, public health services, ophthalmology, neurology, otolaryngology
Advantages
Absence of contact, simplicity, efficiency,
convenience, applicability in children's ophthalmology, low cost in comparison
with foreign analogues, safety.
It is the first time treatment of
eye nystagmus by
external light influence of variable amplitude and frequency,
computer diagnostics of results of eye sight treatment at nystagmus are
proposed.
Stage of development prototype
Documentation available: ( ) No (+) Yes
leaflet, sample, video
The inventor (or inventors)
Name 1 Dmitry
USANOV
Name 2 Anatoly
SKRIPAL
Name 3
Tatyana USANOVA
Name 4
Anton ABRAMOV
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Patent RU № 2288676 - Invention
Priority 10.12.2006
Countries where it is in force
Russian Federation
Business
intention
Licensing
Selling the new product
Contact
Name Dmitry
USANOV
Address:
155, Moskovskaya
str.,
Fax +7 8452 511430 Tel +7 8452 511430
E-mail: UsanovDA@info.sgu.ru
# 24
The Invention
Title
Complex for testing aqueous medium
The problem the inventor(s) wanted to
solve
It is intended for biological assessment of the degree of the environment
contamination and
estimation of toxicity of aqueous media and quick detection of
contamination of surface reservoirs and sewage by heavy metals salts. Allows to determine the water quality parameter
Description & Presentation
It uses the method bio testing by change in the cardiac activity of
daphnias, consisting in registration of changes in parameters of laser
radiation, passing through
the daphnia transparent body, caused by heartbeats. The operation
principle of the express analyzer is based on the effect autodyne detection in
semiconductor generators
Fields of application
Ecology, household use, medicine, chemical industry, electronic equipment, instrument-making
Advantages
The number of information parameters describing daphnias' behaviour in toxic media has been
increased. The developed complex possesses the enhanced sensitivity to small
values of concentration of salts dissolved in water.
Compactness, simplicity and high accuracy of measurement allow to use the
device as an express analyzer to carry out ecological and sanitary-and-hygienic
investigation of water quality.
Stage of development prototype
Documentation available: ( ) No (+) Yes
leaflet, brochure, sample, video
The inventor (or inventors)
Name 1 Dmitry USANOV
Name 2 Alexander SKRIPAL
Name 3 Anatoly SKRIPAL
Name 4 Boris KOROTIN
Name 5
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Patents RU № 2155335 / 2290629 - Invention
Priority 27.08.2005
/ 27.12.2006
Countries where it is in force
Business
intention
Licensing
Selling the new product
Contact
Name Dmitry
USANOV
Address:
155, Moskovskaya
str.,
Fax +7 8452 511430 Tel +7 8452 511430
E-mail: UsanovDA@info.sgu.ru
# 25
The Invention
Title
The
software «DPW-Talka» Digital Photogrammetric Workstation
The problem the inventor(s) wanted to
solve
Automation of processing of aerial and satellite images. Possibility to execute several processes in parallel
at once, instead of in consecutive order. This results in time saving
for creation of end product
Description& Presentation
The program is intended for processing of
aerial, satellite and ground images. As a result of data processing
there can be created orthophotoplans, land maps, digital terrain and elevation
models. All the most laborious processes are automated. People having no
special qualification in Photogrammetry sphere can use the program
Fields of application
The
program is used for creation of orthophotoplans, DEM and DTM at spatial
planning, projecting, in forestry and agriculture.
Advantages
Simplicity
of processing. Work with the program does not require experts with
special photogrammetry qualification. Considerable time saving at creation of end product. Possibility of processing in various coordinate systems. Transition from one coordinate system to another without any data
losses. Possibility of work in conditional coordinate
system. Stability to data loss.
Stage of development production item
Documentation available: ( ) No (+) Yes
sample
The inventor (or inventors)
Name
1 Alexander ALCHINOV
Self introduction. Dr.Sci.Tech.,
Professor, Manager of laboratory of the
Name 2 Valeriy KEKELIDZE
Self
introduction research officer in the
Name 3 Valentin KOSTIN
Self introduction Cand.Tech.Sci, research officer in the
Owner of the invention? ( ) No (+) Yes
Protection
Patent Status:
Certificate
of software registration № 2006610975 from 15.03.2006
Patent RU № 205134 priority 10.11.2005
Patent RU № 205136 priority 21.11.2005
Countries where it is in force
Business
intention
Selling the new product
Contact
Name Valeriy KEKELIDZE
Address: 65, Profsouznaya Str.,
Fax
+7 495 334 8991
Tel +7 495 334 8750
E-mail: lab22@ipu.ru
# 26
The Invention
Title
The
software ‘Talka-GIS’ Geographic information system
The problem the inventor(s) wanted to
solve
Creation of geoinformation systems in short terms.
Possibility of automatic transformation of contours, obtained from satellite
equipment during survey, to a topographic map after postprocessing of satellite
measurements
Description& Presentation
The program is
intended for creation of geoinformation systems. The program can use aerial,
space images, and stereopaires. If necessary the entire map or its fragment can
be printed, and design of the received map will correspond to requirements of
instructions.
Fields of application
The program is applied in Cadastral Chambers for
operative reception of data on the ground areas. For operative entering of new
data
Advantages
The program
allows transforming contours, created by satellite receivers
during survey, to topographic maps. Transformation comes after postprocessing
of satellite measurements. The program allows viewing objects of district not
only as a map, but also in a three-dimensional mode that allows the users
knowing no conventional signs to receive full information on district.
Stage of development production item
Documentation
available: ( ) No ( +) Yes sample
The inventor (or inventors)
Name
1 Alexander ALCHINOV
Self introduction. Dr.Sci.Tech.,
Professor, Manager of laboratory of the
Name 2 Valeriy KEKELIDZE
Self
introduction research officer in the
Name
3 Valentin KOSTIN
Self introduction Cand.Tech.Sci, research officer in the
Owner of the invention? ( ) No (+) Yes
Protection
Patent Status:
Certificate of software registration № 2006610680 from 13.02. 2007
Patent RU
№
205136 priority
21.11.2005
Patent RU № 206104 priority 13.02.2006
Countries where it is in force
Business
intention
Selling the new product
Contact
Name Valeriy KEKELIDZE
Address: 65, Profsouznaya Str.,
Fax +7 495 334 8991
Tel +7 495 334 8750
E-mail: lab22@ipu.ru
# 27
The Invention
Title
The ‘Talka-Pocket PC’ software, the
program for field decoding and updating land maps
The problem the inventor(s) wanted to
solve
Automation
of field decoding process. Automation of data collecting from the satellite receiver during
topographic survey on district.
Description
The program
allows considerable data collecting on district during field decoding.
Semantics is attributed to objects directly in field. If it is impossible to
identify object directly in field, in semantics there can be saved its photo or
audio file. Allows executing topographic survey by means of
the satellite receiver.
Fields of application
Updating of topographic maps of all scales. The
greatest efficiency of application at field decoding of
settlements
Advantages
The program
allows automating considerably process of data collecting at field decoding.
There is no necessity to use paper maps in field. It is impossible to miss
casually object. As the information is put not on the map, but to computer, it
can be operatively sent by e-mail to office for further processing.
Stage of development production item
Documentation available: ( ) No (+) Yes
sample
The inventor (or inventors)
Name 1 Alexander ALCHINOV
Self introduction. Dr.Sci.Tech.,
Professor, Manager of laboratory of the
Name 2 Valeriy KEKELIDZE
Self
introduction research officer in the
Name
3 Valentin KOSTIN
Self introduction Cand.Tech.Sci, research officer in the
Owner of the invention? ( ) No (+) Yes
Protection
Patent Status:
Certificate of software registration
№ 2007610681 from 13.02.2007
Patent RU № 2006117 priority 19.05.2006
Countries where it is in force
Business
intention
Selling the new product
Contact
Name Valeriy KEKELIDZE
Address: 65, Profsouznaya Str.,
Fax +7 495 334 8991
Tel +7 495 334 8750
E-mail: lab22@ipu.ru
# 28
The Invention
Title
Composite
Laminated Material and Article Made Thereof
The problem the inventor(s) wanted to
solve
Production of
the light, high strength, laminated composite material having increased
technological plasticity in the shaping process of articles, and corrosion
resistance while preserving the increased elastic modulus
Description&Presentation
Laminated
сomposite material comprising alternating aluminium sheets and glass
fibre-reinforced plastic layers bound together by elastic polymer layers of
20-100µm thickness. The aluminium sheets consist of two layers: the first one is made of
high-modular, low density Al-Li alloy, the next one-of Al-Mg-Si alloy.
Fields of application
The material is
intended for use as structural sheet material for loaded parts of airframe
(skins, partitions, stringers of fuselage and wings).
Advantages
Said laminated material is high technologically
effective, corrosion and
crack resistant, high modular; has low weight, high strength and
reliability and allows to increase service life of the articles.
Stage of development pre-production
Documentation available: ( ) No (+) Yes leaflet, brochure, sample
The inventor (or inventors)
Name 1 Evgeny KABLOV
Name 2 Iosif FRIDLYANDER
Name 3 Olga SENATOROVA
Owner of the invention? (+) No ( ) Yes Federal State Unitary
Research Institute of Aviation Materials”
Protection
Patent Status: Patents RU № 2270098 - Invention
Priority 14.07.2004
Countries where it is in force
Russian Federation
Business
intention
Licensing
Selling the new product
Contact
Name Galina SAVELIEVA
Address:
Fax +7 495 267 2209 Tel +7 495 263
8893
E-mail: admin@viam.ru
# 29
The Invention
Title
Method of
Fabrication of Beryllium Foil
The problem the inventor(s) wanted to
solve
Development of
the production method of beryllium foil ensuring the 100% yield of the finished
products, the combination of high mechanical properties and vacuum density,
radiation transparency and surface purity of the foil which is used for the
production of windows in X-ray medical equipment, etc
Description&Presentation
Method
of fabrication of beryllium foil comprising the location of beryllium blank in aqueous solution on the
base of potassium bichromate at t°=600°C, forming thereby the modified passive
film, enveloping the blank with metallic case, sealing and rolling it at
600-800°C, cooling and removing the case.
Fields of application
Beryllium foil is used for production of outside
windows of X-ray
tubes, inside windows of particle detectors and proportional counters in
medicine, for luggage control at custom-houses, etc.
Advantages
Said method
allows to avoid the welding of beryllium blank with case metal during the
rolling step and also to avoid contamination of beryllium with alloying
elements from case metal. Said method ensures to receive high mechanical
properties of beryllium foil, to increase vacuum density and to preserve its
radiation transparency
Stage of development pre-production
Documentation available: ( ) No ( ) Yes leaflet, brochure
The inventor (or inventors)
Name 1 Vyacheslav KASKOV
Name 2 Alexander ZHIRNOV
Name 3 Anatoliy FOKANOV
Name 4 Valentina PODURAZHNAYA.
Owner of the invention? (+) No ( ) Yes Federal State Unitary
Research Institute of Aviation Materials”
Protection
Patent Status: Patents RU № 2299102 - Invention
Priority 27.12.2005
Countries where it is in force
Russian Federation
Business
intention
Licensing
Selling the new product
Contact
Name Galina SAVELIEVA
Address:
Fax +7 495 267 2209 Tel +7 495 263
8893
E-mail: admin@viam.ru
# 30
The Invention
Title
Heat Resistant
Nickel-Based Alloy and Article Made Thereof
The problem the inventor(s) wanted to
solve
Production of the heat resistant alloy having high level of properties
for single crystal casting of gas turbine engine components by directional
solidification method.
Description&Presentation
Nickel-based alloy comprising rhenium and
tungsten in optimal ratio which allows to avoid surface defects of the type
“freckles” in the course of single crystal casting and to increase the heat
resistance of the articles at the temperatures above 1000°C.
Fields of application
Said alloy is used for single crystal casting of
working blades, nozzle blades and other components of turbine hot section
working for a long period of time at the temperatures above 1000°C.
Advantages
Said alloy is
technologically effective upon casting; it is not prone to surface defects
(“freckles”) formation and is highly heat resistant. The usage of said alloy
would increase the service life and reliability of the articles made thereof
Stage of development pre-production
Documentation available: ( ) No (+) Yes
leaflet, brochure
The inventor (or inventors)
Name 1 Nikolai OREKHOV
Name 2 Vladimir TOLORAIYA
Name 3 Evgeny KABLOV
Name 4 Iosif DEMONIS
Name 5 Elena CHUBAROVA
Name 6 Galina OSTROUKHOVA
Owner of the invention? (+) No ( ) Yes Federal State Unitary
Research Institute of Aviation Materials”
Protection
Patent Status: Patents RU № 2318030 - Invention
Priority 15.11.2006
Countries where it is in force
Russian Federation
Business
intention
Licensing
Selling the new product
Contact
Name Galina SAVELIEVA
Address:
Fax +7 495 267 2209 Tel +7 495 263
8893
E-mail: admin@viam.ru
# 31
The Invention
Title
Built-up milling cutter for wood-working
The problem the inventor(s) wanted to
solve
Еnhanced
quality of product processing and simplified process of cutter
assembly-disassembly.
Description
The cutter has a single universal body with grooves placing clamping
inserts of various process purpose and clamping wings with bolts for attachment
of the inserts, each having a soldered-on plate with the required profile of
cutting, the inserts are fixed in the body by pins located in mutually
perpendicular planes. For enhancing the quality of processed products and
simplifying the process of cutter assembly-disassembly, one of the pins is made
spring-loaded.
Fields of application
Wood-working industry, cutting tools.
Advantages
Еnhanced
quality of product processing and simplified process of cutter
assembly-disassembly.
Stage of development prototype
Documentation available: ( ) No (+) Yes
leaflet
The inventor (or inventors)
Name 1 Aleksandr JANJUSHKIN
Photo
Self introduction. Dr.Sci.Tech., the
professor, managing chair «Technology of mechanical
engineering», a member of the International union of machine
engineers
Name 2 Dmitry LOBANOV
Photo
Self introduction. Cand.Tech.Sci., the
senior lecturer, the senior lecturer of chair «Technology of
mechanical engineering»
Name 3 Aleksey KUZNETSOV
Photo
Self introduction. The post-graduate
student of chair «Technology of mechanical engineering»
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Patents RU № 2257289 - Invention
Priority 30.03.2004
Countries where it is in force
Russian Federation
Business
intention
Licensing
Contact
Name
Address: 40, Makarenko Str.,
Fax / Tel +7 3953 325360
E-mail: yanyushkin@brstu.ru , mf_nauka@brstu.ru
# 32
The Invention
Title
Automatic control method for electrochemical
dressing of grinding wheel and apparatus for
performing the same
The problem the inventor(s) wanted to
solve
Method is realized by means of special
apparatus for controlling process of electrochemical
dressing of grinding wheel due to changing
electrical parameters of dressing depending upon
change of cutting power
Description
Apparatus includes electrical circuit that allows set and keep constant value of electric current density at dressing operation; control circuit tracking cutting power change and according to it changing density value of electric current at dressing; DC source; dressing electrode (cathode).
Fields of application
Such apparatus allows set target density value of electric current at dressing wheel and keep stable electric current value in electric circuit at changing resistance of inter-electrode gap and automatically control process of continuous electrochemical dressing of wheel. Machine engineering, namely combination methods of working, possibly grinding materials by means of wheels on base of electrically conducting binder
Advantages
Enhanced efficiency, improved
quality of grinding by such wheel
Stage of development prototype, pre-production
Documentation available: ( ) No (+) Yes
leaflet
The inventor (or inventors)
Name 1 Aleksandr JANJUSHKIN
Photo
Self introduction. Dr.Sci.Tech., the
professor, managing chair «Technology of mechanical
engineering», a member of the International union of machine
engineers
Name 2 Aleksey SUR'EV
Photo
Self introduction. Cand.Tech.Sci., the senior lecturer
Owner of the invention?
(+) No ( ) Yes
Protection
Patent Status: Patents RU № 2304504 - Invention
Priority 31.01.2005
Countries where it is in force
Russian Federation
Business
intention
Licensing
Cooperation
Contact
Name
Address: 40, Makarenko
Str.,
Fax / Tel +7 3953 325360
E-mail: yanyushkin@brstu.ru , mf_nauka@brstu.ru
# 33
The Invention
Title
Hardware-software
system for electroacupuncture stimulation
The problem the inventor(s) wanted to
solve
Improvement of
treatment capacity of electroacupuncture; reduction of the device price
Description
The system
provides: acupuncture points (AP) location with indication on the PC monitor;
successive stimulation of up to 16 AP with regulated electrical pulses;
individual stimulation program for each
AP; possibility of change of pulse amplitude by patient during the treatment;
measurement of pulse amplitude and electrical resistance of AP before and after
stimulation
Presentation
The system includes: electrical unit for stimulation
and connection to PC; AP search electrode; holder with stimulation electrodes
cable, connecting to acupuncture needles; manipulator for pulse amplitude
regulation by the patient; software for PC.
Fields of application
Treatment of
various diseases (bronchial asthma, bowel irritable syndrome, pain relief, etc) in hospitals
and health care
areas
Advantages
Two feedback
channels; participation of the patient in the treatment process; flexible
software; objective measurement of treatment efficiency
Stage
of development Рroduction item
Documentation
available: ( ) No (+) Yes leaflet, brochure, sample, video, website
The inventor (or inventors)
Name 1 Andrew PESKOV
Photo
Self
introduction Doctor of Science in Medicine; Professor of
Medical Department
of
Name 2 Vladimir STUCHEBNIKOV
Photo
Self introduction Doctor of
Science in Techniques; General Director of JSC “Microelectronic Sensors &
Devices” (ZAO MIDAUS),
Owner of the invention?
(+) No ( ) Yes JSC
“Microelectronic Sensors & Devices” (ZAO
MIDAUS),
Protection
Patent Status: Utility model
Priority
Countries where it is in force
Business
intention
Cooperation
Selling the new product
Contact
Name Vladimir STUCHEBNIKOV
Address:
Fax +7 8422 666683 Tel +7 8422 660591
E-mail: mida@mv.ru; vms@midaus.com
# 34
The Invention
Title
Method for thermal imaging
control of water in aircraft plane honeycomb panels
The problem the inventor(s) wanted to
solve
The basic differences of the proposed
development from the existing prototypes are
-
Possibility of the quantitative
interpretation of the diagnostics results;
-
Availability of software (know-how) for
full processing of
the heat control results, in particular, for defectometry of composite
materials.
-
Description&Presentation
An
invention belongs to the field of nondestructive inspection. The method allows to obtain thermograms of plane design zones, determine a defective
zone area with the use of a marker of known sizes and average water column
height with the help of an ultrasonic device and calculate amount of
water in defective zones
Fields of application
Nondestructive check of materials and pats
in aerospace technique; diagnostics of buildings of determination of heat
losses and detection of concealed defects; inspection of power plants; ecological monitoring; medical
screening diagnostics.
Advantages
Remoteness
and high poductivity, quantitative asseeement of heat losses and defects
parametes;
detetion
of concealed defects in the materials, can’t be cntrolled by the standad
methods.
Stage of development production item
Documentation available: ( ) No (+) Yes
leaflet, brochure
The inventor (or inventors)
Name 1
Name 2 Denis NESTERUK
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Patents RU № 2284515 - Invention
Priority 30.03.2005
Countries where it is in force
Russian Federation
Business
intention
Licensing
Selling the new product
Contact
Name
Address: 30,
Fax +7 3822 529 658 Tel +7 3822
563 914/ 563 968
E-mail: vlasov@tpu.ru
# 35
The Invention
Title
Method of production of pectin
The problem the inventor(s) wanted to
solve
Development of technology of derivement of
pectin with high quality
from different plant raw materials
Description&Presentation
The
process of derivement of pectin substances is realized using non-acidic method
based on vacuum of hydrolyses mixture with optimum speed of pressure changes.
Fields of application
The invention is used for the technology
of pectin in food industry.
Advantages
The invention reduces duration of
technological process
for 20-50% and it increases for 10-15% the amount of pectin
substances.
Stage of development pre-production
Documentation available: ( ) No (+) Yes
leaflet, brochure
The inventor (or inventors)
Name 1 Liudmila DONCHENKO
Name 2 Georgy FIRSOV
Name 3 Nicolay KOTLYAROV
Owner of the invention? () No (+ ) Yes
Protection
Patent Status: Patents RU № 2251553 - Invention
Priority 10.09.2003
Countries where it is in force
Russian Federation
Business
intention
Licensing
Cooperation
Contact
Name Liudmila DONCHENKO
Address: 12, Kharkovskaya Str., Krasnodar, 350044, Russia
Fax +7 861 2215805 Tel +7 861
2215805
E-mail: lvdonchenko@newmail.ru; pectin@mail.ru
# 36
The Invention
Title
Method of cleaning of dry pectin extract.
The problem the inventor(s) wanted to
solve
Increasing of pure pectin in product
sample
Description&Presentation
The
process of cleaning is realized in 6 stages using reaction mixtures with
different content of electrоactivated water and alcohol with definite рН and temperature
Fields of application
The
invention is used for the technology of pectin in food industry and pharmacy.
Advantages
The invention foresee
pectin production with given characteristic for different branches of food
industries. Increases the ability of complex formation for 3,5-5
times.
Stage of development pre-production
Documentation available: ( ) No (+) Yes
leaflet, brochure
The inventor (or inventors)
Name 1 Liudmila DONCHENKO
Name 2 Georgy FIRSOV
Name 3 Nicolay KOTLYAROV
Owner of the invention? () No ( +) Yes
Protection
Patent Status: Patents RU № 2284126 - Invention
Priority 16.02.2005
Countries where it is in force
Russian Federation
Business
intention
Licensing
Cooperation
Contact
Name Liudmila DONCHENKO
Address: 12, Kharkovskaya Str., Krasnodar, 350044,
Russia
Fax +7 861 2215805 Tel +7 861
2215805
E-mail: lvdonchenko@newmail.ru; pectin@mail.ru
# 37
The Invention
Title
A Material for athletic (sportive) teeth
buses
The problem the inventor(s) wanted to
solve
The
preventive maintenance action origin and developments traumatic paradontit
beside by athlete(sportsman)
and persons, systematically executing power exercises.
Description&Presentation
New material for technology of the
fabrication of the atheletic(sportive) buses providing
preventive actions of the origin and developments traumatic paradontit
beside(at;by) athlete(sportsman) and persons, systematically executing power
exercises
Fields of application
Invention pertains to medicine, to
orthopedic stomatology
Advantages
The
Advantage of the proposed way before the known(famous),
is inclosed, in that that is designed completed technology, including material,
new construction of the individual sportive teeth buses with lowered adgesive
microorganism mouth to bu and way of the fabrication of the buse.
Stage of development production item
Documentation available: ( ) No (+) Yes
leaflet, brochure, sample.
The inventor (or inventors)
Name 1 Sergey ARUTUNOV
Photo
Self
introduction Well-earned physician RF, d.m.s., professor MSMSU
Name 2 Alexander Stepanov
Photo
Self introduction k.m.s., assistent MSMSU
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Patents RU №№ 2291881/ 2302853б
2306163 - Invention
Priority 22.06.2005
Countries where it is in force
Russian Federation
Business
intention
Cooperation
Selling
the new product
Contact
Name Alexander Stepanov
Address:
Fax +7 495 153 1453 Тel +7 916 823 0870
E-mail: atachment@yandex.ru
# 38
The Invention
Title
Mode of rescue of people from seismic dander
area under the threat of earthquake
The problem the inventor(s) wanted to
solve
Principally new model and device capable to
give short-term forecasts of possible earthquake in exact seismic danger area,
taking in consideration influences of different provoking earthquake cosmological
factors.
Description&Presentation
The maximal quantities
of the scale of magnetic field, electric field and gravitational field variations in the seismic danger area, as
well as vector direction to Zenith and rotation of
this area together with the Earth are determined, bringing the notion of
the stating moment of expectation of the
earthquake.
Fields of application
Considered to be life-saving
facility for the people under the threat of earthquake.
Advantages
Allows to predict
the beginning of the earthquake formation in the time period from several hours to several days.
Stage of development
Certain particular technologies are already modeled,
the elements of the experimental
sample of the system providing the proposing method are already
produced.
Documentation available: ( ) No (+) Yes
leaflet, brochure
The inventor (or inventors)
Name 1 Yury BAUROV
Name 2 Ara ABRAMYAN
Name 3
Name 4 Alexander BAUROV
Name 5 Alex BAUROV
Owner of the invention? ( ) No (+) Yes
Protection
Patent Status: Patent
pending RU № 2008106065 - Invention
Decision of grant the Patent of Russian Federation
signed on
the 22.08.2008 is received
Priority 20.02.2008
Countries where it is in force
Russian Federation
Business
intention
Looking for investor
Licensing
Selling the new product
Contact
Name Vladimir Solodovnikov
Address: 7, Kitaygorodskiy proezd,
Fax +7 495 698 3181 Tel +7 901 513 9969
E-mail: vladimir.solodovnikov@gmail.com
# 39
The Invention
Title
Preventive anticancer vaccine
The problem the inventor(s) wanted to
solve
Embryonic antitumoral modulator for the large pool
prophylaxis of normal fetoprotein for
the people from the cancer high risk group.
Description&Presentation
Made from
embryonic substances using the method of kriodestraction, extraction and deposition in increasing concentration
alcohols, contains proteoglycan complex
of hyaluronic acid, tumorassociated
antigens of normal embryogenesis
Fields of application
Considered to be a drug and
can be applied in medicine, in oncology in particular
Advantages
Allows to smooth the tolerance of immune system
to oncofetal antigens expressing
permanently on the surface of the appearing tumor cells. Provides antimetastatic effect. No analogues
were found.
Stage of development pre-production
Documentation available: ( ) No (+) Yes
leaflet, brochure, experimental patterns
The inventor (or inventors)
Name 1 Levon MKRTCHYAN
Name 2 Ara АBRAMYAN
Owner of the invention? ( ) No (+) Yes
Protection
Patent Status: Patents pending RU №№ 2007139000 , 2007139002 - Invention
Decision of grant the Patent of Russian Federation
signed on the
16.06.2008 is
received
Priority 22.10.2007
Countries where it is in force Russian
Federation
Business
intention
Looking for investor
Licensing
Selling the new product
Contact
Name Vladimir Solodovnikov
Address: 7, Kitaygorodskiy proezd,
Fax +7 495 698 3181 Tel +7 901 513 9969
E-mail: vladimir.solodovnikov@gmail.com
# 40
The Invention
Title
Method for recycling of sheet-rolling
manufacture waste products
The problem the inventor(s) wanted to
solve
A method of separation of greasy scale and water with subsequent recycling
of scale in agglomeration manufacture and mineral oils reuse
Description & Presentation
During hot rolling dust scale is generated and mixed
with water cooling metal and rollers and mineral oils. The resulting mix is of high
decomposition stability and unsuitable for recovery.
Mix discharge to biosphere reduces production environmental safety,
pollutes environment, Well-known recovery methods are technically intricate and
non-value-added. The essence of the method
is that oiled scale is at first settled sequentially with primary settle
removal.
Recovery is carried out by mixing with powder-state
calcium oxide at specified mass ratio of calcium oxide and settle then primary
settle is added to existing mix in ratio 10-50% after that ix is agglomerated.
Fields of application
Metallurgy
Advantages
The method increases
manufacture ecological safety and reduces harmful impart on environment
Stage of development production item
Documentation available: ( ) No (+) Yes
leaflet, brochure
The inventor (or inventors)
Name 1 Vyacheslav PIMENOV
Name 2 Viktor TISHKOV
Name 3 Pavel MELNIKOV
Owner of the invention? (+) No ( ) Yes Severstal Open Joint Stock Company
Protection
Patent
Status:
Patents RU № 2078441- Invention
Priority 12.04.1994
Countries where it is in force
Russian Federation
Business
intention
Cooperation
Licensing
Contact
Name Severstal Open Joint Stock Company
Address: 30,
Fax +7 8202 533081
Tel +7 8202 565512 /
533275
E-mail: mvroslyakova@severstal.com
# 41
The Invention
Title
Low alloyed carbon steel
The problem the inventor(s) wanted to
solve
An invention connected with manufacture of low
alloyed steels for electric-welded pipes with increased corrosion resistance.
Description&Presentation
Chemical composition of steel possessing high
resistance to different kinds of corrosion and corrosion-mechanical destruction
at sufficient strength, satisfactory weldability and toughness have been proposed
Fields of application
-
Systems of water supply; thermal networks;
oil-field pipelines; other electric welded pipes of high corrosion resistance
which can be used for pipelines transporting corrosive liquids.
Advantages
Improvement of ecological safety of
pipelines; the low contents of nonmetallic inclusions; increase of pipeline
trouble-free performance period; increase in corrosion esistance.
Stage of development production item
Documentation available: ( ) No (+) Yes
leaflet, brochure
The inventor (or inventors)
Name 1 Irina RODIONOVA
Name 2 Olga BAKLANOVA
Name 3 Alexandr GOLOVANOV
Name 4 Andrey LYATIN
Owner of the invention? (+) No ( ) Yes Severstal Open Joint Stock Company
Protection
Patent Status: Patents RU № 2318030 - Invention
Priority 15.11.2006
Countries where it is in force
Russian Federation
Business
intention
Licensing
Selling the new product
Contact
Name Severstal Open Joint Stock Company
Address: 30,
Fax +7 8202 533081
Tel +7 8202 565512 /
533275
E-mail: mvroslyakova@severstal.com
# 42
The Invention
Title
Steel rolled sheets with improved properties
The problem the inventor(s) wanted to
solve
Steel is intended for sea technical equipment,
drilling platforms, etc. in conditions of Far North. It is characterized by
improved bondability, increased fragile destruction resistibility, high
metallurgical quality.
Description & Presentation
Thickness … 10-50 mm
Width … 1200-3200 mm
Length of sheets …
4500-11 500 mm
Fields
of application
Ice-ships, ice-proof drilling rigs;
infrastructure facilities exploited in cold-weather; hosting and shipboard
cranes exploited in cold- weather.
Advantages
-
2 times improved weldability, no need to preheat large-size
steelworks welded at tempeatues -50C and higler;
-
Increased resistance to brittle fracture, application at
temperature - 400C and higher;
-
High serviceability, crack retardation up to temperature – 30...-400C;
-
Applliction of resource-conscious processing technologies;
-
High quality of steel products;
-
Increase of ecological safety of stel products/
Stage of development production item
Documentation available: ( ) No (+) Yes
leaflet, brochure
The inventor (or inventors)
Name 1 Igor GORYNIN
Name 2 Elena KHLUSOVA
Name 3 Alexandr GOLOVANOV
Name 4
Owner of the invention? (+) No ( ) Yes Severstal Open Joint Stock Company
Protection
Patent Status: Patents RU № 2265067 - Invention
Priority 25.10.2004
Countries where it is in force
Russian Federation
Business
intention
Licensing
Selling the new product
Contact
Name Severstal Open Joint Stock Company
Address: 30,
Fax +7 8202 533081
Tel +7 8202 565512 /
533275
E-mail: mvroslyakova@severstal.com
# 43
The Invention
Title
Method for manufacturing of strip
steel
The problem the inventor(s) wanted to
solve
Steel is intended for sea technical equipment,
drilling platforms, etc. in conditions of Far North. It is characterized by
improved bondability, increased fragile destruction resistibility, high
metallurgical quality.
Description & Presentation
Thickness … 20-40 mm
Width … 3400
mm
Length of sheets …
12 000 mm
Fields
of application
Ice-ships, ice-proof drilling rigs;
infrastructure facilities exploited in cold-weather; hosting and shipboard
cranes exploited in cold- weather.
Advantages
Improvement of ecological safety of
pipelines;
Increased resistance to brittle fracture;
High strength in conjunction with high processability,
ductility and cold resistance;
Increase of reliability and durability of pipelines;
Undersea pipelines made of Russian tubes
Stage of development production item
Documentation available: ( ) No (+) Yes
leaflet, brochure
The inventor (or inventors)
Name 1 Igor GORYNIN
Name 2 Viktor MALYSHEVSKIY
Name 3 Alexandr STEPANOV
Name 4
Owner of the invention? (+) No ( ) Yes Severstal Open Joint Stock Company
Protection
Patent Status: Patents RU № 2270873 - Invention
Priority 15.03.2005
Countries where it is in force
Russian Federation
Business
intention
Licensing
Selling the new product
Contact
Name Severstal Open Joint Stock Company
Address: 30,
Fax +7 8202 533081
Tel +7 8202 565512 /
533275
E-mail: mvroslyakova@severstal.com
# 44
The Invention
Title
Valve
The problem the inventor(s) wanted to
solve
The
design philosophy makes it possible to widen the temperature range of use and
reduce transmission effort and
energy expended on the valve sealing.
Description & Presentation
Object of the
invention - expansion of the operational capabilities of valve due to expansion
of operation temperature range. For the number of materials physical and strength
characteristics stand constant in the wide temperature range, only changing
after reaching of the specific value of temperature. The use of a valve allows
to broad the temperature range of valve application, the correction of saddle
hardness allows to make it thinner-walled.
Fields of application
Heating and
ventilation
Advantages
This leads to reduction in
the effort of pressing of locking part ensuring the containment of valve, and
thus to reduce effort of drive and energy, spent on hermetic sealing of valve.
Stage of development production item
Documentation available: ( ) No (+) Yes
leaflet, brochure
The inventor (or inventors)
Name 1 Alex Dolotov
Name 2 Peter Ogar
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Know-How
Priority
Countries where it is in force
Business
intention
Selling
the new product
Contact
Name
Address: 40, Makarenko Str.,
Fax +7 3953 335 412 Tel +7 3953 332 008
E-mail: dolotov@brstu.ru
# 45
The Invention
Title
Internal cushioning wheel of a
cross-country capacity vehicle
The problem the inventor(s) wanted to
solve
The wheel is intended for increasing
motion evenness of a vehicle through reducing the weight
of a wheel propeller
and increasing maximum radial motion of a nave in relation to the rim.
Description & Presentation
There are known
the construction of such wheels, which contain separately
made and jointly connected by elastic elements nave both the rim and also the
devices, which limit the lateral displacement of nave relative to rim. The wheels of increased
elasticity together with the pneumatic balloon tires it expedient to for
off-road vehicles. Such wheel construction allows to avoid
using of suspension, preserving in this case the high motion smoothness and
ensuring the increased passability and low footprint pressure
Fields of application
Traffic, transport, _ car accessories
Advantages
The technical result of invention consists in increase
of the motion smoothness due mass decrease and increase in the maximum radial
displacement of nave relative to rim
Stage of development prototype
Documentation available: ( ) No (+) Yes
leaflet, brochure
The inventor (or inventors)
Name 1 Alexander Enaev
Name 2
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Patents RU № 2228273 - Invention
Priority 23.05.2002
Countries where it is in force
Russian Federation
Business
intention
Licensing
Selling the new product
Contact
Name
Address: 40, Makarenko Str.,
Fax +7 3953 335 412 Tel +7 3953 332 008
E-mail: dolotov@brstu.ru
# 46
The Invention
Title
High pressure joint seal
The problem the inventor(s) wanted to
solve
Invention relates
to sealing technology and can be used for sealing of sectional joints of high
pressure equipment, for example the locks of pressure vessels, pipelines
connections used in chemical, petrochemical, energy and branches of industry.
Description & Presentation
There are known
the construction of such wheels, which contain separately
made and jointly connected by elastic elements nave both the rim and also the
devices, which limit the lateral displacement of nave relative to rim. The wheels of increased
elasticity together with the pneumatic balloon tires it expedient to for
off-road vehicles. Such wheel construction allows to avoid
using of suspension, preserving in this case the high motion smoothness and
ensuring the increased passability and low footprint pressure
Fields of application
Chemical industry
Advantages
The sealing
construction is technologically effective, ferrule can set itself practically
with any errors of manufacturing of sealing surfaces, ensures uniform
distribution on perimeter of sealing effort, thus expenditures for sealing
production reduced, decreased power consumption by hermetic sealing of details,
rises reliability of joints.
Stage of development prototype
Documentation available: ( ) No (+) Yes
leaflet, brochure
The inventor (or inventors)
Name 1 Alex Dolotov
Name 2 Peter Ogar
Name 3 Valery Pogodin
Name 4 Yury Shvets
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Know-How
Priority
Countries where it is in force
Business
intention
Selling the new product
Contact
Name
Address: 40, Makarenko Str.,
Fax +7 3953 335 412 Tel +7 3953 332 008
E-mail: dolotov@brstu.ru
# 47
The Invention
Title
Hydraulic cylinder
The problem the inventor(s) wanted to
solve
Invention relates
to volumetric hydraulic engines, intended for conversion of energy of the flow
of working fluid into the mechanical energy.
Description & Presentation
The declared hydraulic cylinder can be used in
construction of multifunctional hydraulic machines, and also robots and
manipulators, for example, as the hydromechanical hand, on simplicity which has
advantages over known clamps, widely used in robotized production systems
Fields of application
The proposed
device can be used in the construction of the multifunctional hydraulic (with
the hydraulic drive) machines, and also robots and manipulators.
Advantages
The technical
result is in increase in the functional possibilities of hydraulic cylinders of
multifunctional hydraulic machines, robots and manipulators, and also
simplification in the construction of the drive of their working (actuating)
elements.
Stage of development prototype
Documentation available: ( ) No (+) Yes
leaflet, brochure
The inventor (or inventors)
Name 1 Dmitry Kobzov
Owner of the invention? (+) No ( ) Yes
Protection
Patent Status: Patents RU № 2272940 - Invention
Priority 31.05.2004
Countries where it is in force
Russian Federation
Business
intention
Licensing
Selling the new product
Contact
Name
Address: 40, Makarenko Str.,
Fax +7 3953 335 412 Tel +7 3953 332 008
E-mail: dolotov@brstu.ru
# 48
The Invention
Title
Rank sorter
The problem the inventor(s) wanted to
solve
A rank sorter is intended for
transformation of an unsorted serial set of n analog signals to their sorted by
rank indications parallel set, and it can be used in systems of multiparametric
monitoring and control as the mean of preliminary data processing.
Description & Presentation
- the
quantity of n input signals: up to 100;
- the
range of input signal change: 0...10 V;
- the
time of transformation: 10*n microseconds;
- Supply voltage: +15 V, –15 V.
Fields of application
Intended for continuous monitoring of methane (CH4) and carbon monoxide (CO)
concentration in the atmosphere of rooms
Advantages
- the
number of input information channels is n times less than known analogs have;
- processing
time decreases 5-10 times;
- the
circuit for embedding the sorter into the system is simplified and its price is
reduced considerably;
- there
is a possibility of effective hardware realization in a single-chip
construction;
- the
structure of the sorter is regular.
Stage of development production item
Documentation available: ( ) No (+) Yes
leaflet, brochure, sample, video
The inventor (or inventors)
Name 1 Dmitry
ANDREEV
Owner of the invention?
(+) No ( ) Yes
Protection
Patent Status: Patents RU № 2228273 - Invention
Priority 23.05.2002
Countries where it is in force
Russian Federation
Business
intention
Licensing
Selling the new product
Contact
Name
Address: 32, Severny Venec Str.,
Fax +7 8422 43 0323 Tel +7 8422 430 323
E-mail: svs@ulstu.ru
# 49
The Invention
Title
System of turnaround waters sanitation
The problem the inventor(s) wanted to
solve
Clearing in
magnetic separators from ferromagnetic impurity by working surfaces of magnetic
cartridges; clearing in a gravitational
cleaner from mechanical inclusions by
precipitation on horizontal plates; removal of an oil film and corpuscles from
water using an adhesive separator; filtering using cartridge cassette filter
Description & Presentation
The system is designed for clearing natural, turnaround,
sewage and process liquids from the foreign, firm, oil and soluble inclusions.
System clears water that of petrocontaining mechanical impurity suspended
matters), organic matters, anions and basic ions (including heavy metals) up to
maximum permissible norms
that allows to reuse it in process or to dump in the open
ponds. The system allows to increase term of application process liquids
in 6 … 8 times.
Fields of application
Sanitary
Advantages
Small power consumption,
compactness , adaptedness to sweeping
scaling, adaptedness to a batch production of the wide nomenclature of standard
sizes from 100 up to 20000 cubic metre per hour, simplicity of designing and
modernization, rather low cost
Stage of development production item
Documentation available: ( ) No (+) Yes
leaflet, brochure, video
The inventor (or inventors)
Name 1 Egor Bulyzhev
Owner of the invention?
(+) No ( ) Yes
Protection
Patent Status: Patents RU № №
2194744/2196809/2263077 - Invention
Priority 23.05.2002
Countries where it is in force
Russian Federation
Business
intention
Licensing
Selling the new product
Contact
Name
Address: 32, Severny Venec Str.,
Fax +7 8422 43-03-23
Tel +7 8422 430 323
E-mail: svs@ulstu.ru
# 50
The Invention
Title
The spring-transporting devices of agricultural machines
The problem the inventor(s) wanted to
solve
The spring-transporting devices
can move materials to all directions, possess significant universality that
allows to use them for distribution of loose and liquid forages, entering in to
ground of fertilizers, drying of grain, swapping dirty liquids, excrements etc.
Description & Presentation
25 variants of machines with
spring-transporting devices are developed and have passed
production tests, including:
- Device for mixing and
distributing of forages
- Device for removal liquid and
semi-liquid manure
- Loaders of grain and other
loose materials
- Device for removal of an external moisture from grain
- Device for pumping over the
highly-viscous liquids
- Complex for storage of casein
with natural ventilation and the dosed out uploading
- Complex for a sink of grain
- Device for gathering of the
poured liquids
- Device for seeds pickling
- Device for the dosed out
distribution of forages
Fields of application
Agriculty
Advantages
The technical and economical
effect:
- Decrease in power consumption
of process on 40…80%
- Construction materials
decreased in 2…5 times
- Economy of fuel on mobile
units on 20…30%
Stage of development production item
Documentation available: ( ) No (+) Yes
leaflet, brochure, video
The inventor (or inventors)
Name 1 Victor Artemjev
Name 2 Hamlet Gubeidullin
Name 3 Jores Isaev
Name 4
Owner of the invention?
(+) No ( ) Yes
Protection
Patent Status: Patents RU № № 2270559/2273988/2298919 - Invention
Priority 10.11.2000/29.09.2003/29/06/2005
Countries where it is in force
Russian Federation
Business
intention
Licensing
Selling the new product
Contact
Name
Address: 1, Boulevard of Novy Venets,
Fax +7 8422 552 375
Tel +7 84231 51175
E-mail: svs@ulstu.ru
# 51
The Invention
Title
Lubricant
composition and lubricant material with this composition
The
problem the inventor(s) wanted to solve
Increase
in efficiency of technical characteristics (tribological, antioxidant) and
other properties of basic lubricant materials.
Description.
Development of lubricant composition on the basis of liquid polyesters
with high lubricant efficiency and nanoparticles of inorganic components. It is based:
-
on improvement of bearing capacity in
accordance with STF-effect (Shear Thickening Fluid);
-
on inhibitor influence of
nanocomponents upon extension of oxidizing chain-reaction
-
on the effect of synergism
with the set of additives to lubricant materials.
Fields
of application
Manufacturing of lubricant materials on the basis of
nanocomponents
Advantages:
- improvement of basic properties of lubricant
materials due to application of ecological nanocomponents;
- manufacturing of lubricants of new generation.
Stage of development.
Manufacturing of pre-production samples of
lubricant compositions for basic motor and transmission oils.
Documentation
available: ( ) No (+) Yes the samples of a lubricant composition in packing;
posters.
The inventor (or inventors)
Name
1 Vyacheslav BEKLEMYSHEV
Name 2 Igor MAKHONIN
Name 3
Name 4 Eugeny KONSTANTINIDI
Name 5 Jury KORSAKOV
Owner of the invention? (+)
No ( ) Yes LLC
“BKM”
Protection
Patent Status: Patents application
№ 2008136478 - Invention
Priority 11.09.2008
Countries where it is in force
Russian Federation
Business intention
Licensing
Cooperation
Looking
for investor(s)
Contact
Name Vyacheslav Beklemyshev
Address:
house 12A.,
Andreevka, Solnechnogosky district,
Fax: + 7 495 228 0815 Tel: + 7 495 228 0814
E-mail:
bersenbek@ mail. ru
# 52
The Invention
Title
Metod of obtaining of a paper with biocidal properties
The
problem the inventor(s) wanted to solve
Development of an ecological paper with prolonged antibacterial and
antifungal properties.
Description.
Application of biocidal components based on
layered minerals in nanodispersion form in compound of the paper mass for
obtaining of a paper for various purposes. Layered minerals are chemically
modified by ions of biometals which are sorbed by the cell capsule. It destroys
the process of cell fission (bacterial-statical effect) and depresses exchange processes in microbe cells.
Fields
of application
Manufacturing
of cellulose containing materials, i.e. a paper with biocidal properties
including securities and products of sanitary-and-hygienic application
(pampers, sanitary towel, etc.,)
Advantages:
-
application of ecological biocidal mineral
components with antiallergic and effective prolonged antibacterial influence
upon human skin;
-
mineral components are compatible with other components on the basis of
synergism effect.
Stage of development. there are
prototypes with biocidal properties
Documentation available: ( ) No (+) Yes samples, leaflets
The inventor (or inventors)
Name
1 Ara ABRAMYAN
Name
2 Vyacheslav BEKLEMYSHEV
Name 3 Igor MAKHONIN
Name 4
Name 5 Alexander LETOV
Name 6 Evgenya BEKLEMYSHEVA
- Owner of the invention? (+) No ()
Yes CSC “Institute of Applied
Nanotechnology”
Protection
Patent Status: Patents application
№ 2008109357 - Invention
Priority 14.03.2008
Countries where it is in force
Russian Federation
Business intention
Licensing
Cooperation
Looking
for investor(s)
Contact
Name Vyacheslav Beklemyshev
Address:
office 1314., Savelkynsky
proezd, Zelenograd,
Fax: + 7 495 228 0815 Tel: + 7 495 228 0814
E-mail:
bersenbek@ mail. ru
# 53
The Invention
Title
Device “Periosensomer” - to estimate nervous
excitability of the tooth guiding
The
problem the inventor(s) wanted to solve
The research
method and “Periosenomere” can be easily applied in clinical practice for a
short time interval diagnostics of thin functional shifts of the nerves in
periodont
Description.
This method and
devise “Periosenomere”
makes it possible to estimate mechanical charactheristics of the
tooth paradont (functional endurance) and functional condition of its touch
sensivity (adility of catching dispersed material during chewing process and
neutralizing its effect on gastroenteric path).
Presentation.. Mobile device
as a mobile phone (50mm X 100mm X 15mm)
Fields
of application
Stomatology - Prostethic dentistry, periodontology,
implantology
Advantages:
The research
method and “Periosenomere” can be easily applied in clinical practice for a
short time interval diagnostics of thin functional shifts of the nerves in
periodont. We can estimate nervous excitability of the tooth guiding by
functional changes of nerves and therefore functional condition of chewing
muscles as well. This method and devise “Periosenomere” makes it possible to estimate
mechanical charactheristics of the tooth paradont (functional endurance) and
functional condition of its touch sensivity (adility of catching dispersed
material during chewing process and neutralizing its effect on gastroenteric
path.
Stage of development. prototype
Documentation available: ( ) No (+) Yes
samples,
leaflets
The inventor (or inventors)
Name
1 Grachya SANOSYAN
Photo.
Self introduction. Ph.
M. Science, Director of the centre “Innovation technologies in stomatology”,
scientist-researcher Laboratory of materals and alloys of the Moscow State University of Medicine and
Dentistry (Department of Prostethic Dentistry)
Name
2 Pavel SAFRONOV
Name 3 Igor LEBEDENKO
- Owner of the invention? () No (+)
Yes
Protection
Patent Status: Patents RU № 2190983 - Invention
Priority 20.10.2002
Countries where it is in force
Business intention
Licensing
Cooperation
Looking
for investor(s)
Contact
Name Grachya Sanosyan
Address:
5, Selkhoztekhnika, Mikhnevo, Stupino Area,
Fax: +7 495 655 0034 Tel: + 7 916 611 2906
E-mail:
sanosyan@inbox.ru